Glaze Batch Calculator
Updated How we review
Offline — showing the version cached on .
Unresolved errors (0)
Results
Ingredient 1 mass is 300.00 g. Ingredient 2 mass is 400.00 g. Ingredient 3 mass is 200.00 g. Ingredient 4 mass is 100.00 g.
- Ingredient 1 mass
- g
- Ingredient 2 mass
- g
- Ingredient 3 mass
- g
- Ingredient 4 mass
- g
Your recent calculations
Stored only on this device.
| Solved for | Target batch mass | Ingredient 1 percentage | Ingredient 2 percentage | Ingredient 3 percentage | Ingredient 4 percentage | Ingredient 1 mass | Ingredient 2 mass | Ingredient 3 mass | Ingredient 4 mass |
|---|
* computed under superseded data
How to use this calculator
- Enter Target batch massEnter the target amount in grams; it supplies the total used by the ingredient calculations. 1
- Enter Ingredient 1 percentageEnter this ingredient’s share as a percent. Its mass is the corresponding part of the total, calculated using the percent in decimal form. 2
- Enter Ingredient 2 percentageSet this ingredient’s portion in percent units; the calculation applies its decimal value to the total batch amount. 2
- Enter Ingredient 3 percentageEnter the percentage of the batch assigned here. The result is the part calculated from the total using the percentage in decimal form. 2
- Enter Ingredient 4 percentageSpecify this ingredient’s share as a percent; its mass is found by multiplying the total by that share in decimal form. 2
- Read Ingredient 4 mass
Ingredient 4 mass (g) vs Target batch mass (g)
Ingredient 4 mass (g) Target batch mass (g)
What this calculates
OpenStax connects a percent with a part of a total. That gives a concrete picture: the batch is the whole, and an ingredient is a share. This page turns each entered share into a mass. 2
The supplied sources serve different purposes. OpenStax supplies percentage math, while LibreTexts supplies glaze examples and a safety note. The sections keep those source roles visible. 1
Ingredient roles in glaze context
The glaze source names silica, feldspar, whiting, and kaolin in published mass examples. It gives no descriptions of their chemistry roles or alumina's role. The supplied excerpts support batch arithmetic here, not a role chart. 1
The percentage calculation
Short formula: ingredient mass = batch mass × ingredient percentage ÷ 100. The page applies this relationship separately to its four results. OpenStax expresses the general relationship as part = percent × total. 2
Named steps: multiply batch_mass by the matching ingredient percentage, then divide by 100. The page equations are: ingredient_1_mass = batch_mass * ingredient_1_percent / 100 ingredient_2_mass = batch_mass * ingredient_2_percent / 100 ingredient_3_mass = batch_mass * ingredient_3_percent / 100 ingredient_4_mass = batch_mass * ingredient_4_percent / 100 Division expresses the percent in decimal form. 2
Definitions: batch_mass is the target total. Each ingredient percentage is a share of that total. Each corresponding ingredient mass is the amount calculated from that share. 2
Entering a batch
Enter the target batch mass in grams, then set a percentage for each ingredient. Match each percentage to the ingredient it describes. Read the paired output as its calculated mass. 1
Worked examples
LibreTexts example: 1000 g batch: Ingredient 1 mass 300.00 g
See inputs and calculation
Starting values
- Target batch mass
- 1000 g
- Ingredient 1 percentage
- 30 %
- Ingredient 2 percentage
- 40 %
- Ingredient 3 percentage
- 20 %
- Ingredient 4 percentage
- 10 %
- Ingredient 1 mass: 300.00 g
Show arithmetic
1000 * 30 / 100Full branch logic
1000 * 30 / 100 - Ingredient 2 mass: 400.00 g
Show arithmetic
1000 * 40 / 100Full branch logic
1000 * 40 / 100 - Ingredient 3 mass: 200.00 g
Show arithmetic
1000 * 20 / 100Full branch logic
1000 * 20 / 100 - Ingredient 4 mass: 100.00 g
Show arithmetic
1000 * 10 / 100Full branch logic
1000 * 10 / 100
Original example and source context
Input bounds and result meaning
The page accepts target batch mass from 0.01 to 100000 g; both edges are page choices, not formula limits. Each ingredient percentage accepts 0 to 100 %, also by page choice. Outside these limits, the calculator refuses an answer and states the limit. These boundaries describe accepted entries, not glaze chemistry recommendations. 2
Read each result as the computed mass for its ingredient. The cited glaze excerpts show arithmetic for ingredient amounts. They do not establish what a glaze ratio will suggest in a studio. 1
Company, trust, policies, and glaze safety
The supplied glaze source advises that glazes used for functional ware be food-safe. It separately warns that some materials can be hazardous. Those are the source-backed safety points for this page's responsible-use context. 1
Glaze Blend Rush
Glaze Blend Rush The published glaze example gives silica as 30% of 1000 grams, or 300 grams. It gives feldspar as 40% of 1000 grams, or 400 grams; whiting as 20% of 1000 grams, or 200 grams; and kaolin as 10% of 1000 grams, or 100 grams. The worked example records the source arithmetic for those pairs. 1
See what a glaze ratio shows
You can read a glaze ratio as each material’s share of the full batch. The glaze chemistry source lists silica, feldspar, whiting, and kaolin as percentage shares. 1
Know what the sources cover
The sources do not identify the company, explain how you can judge its trustworthiness, or state its policies. The glaze source does warn that some materials are hazardous and says glazes for functional ware should be food-safe. 1
Key facts
How this is calculated
For each numbered ingredient, convert its percentage to a decimal by dividing by 100, then multiply by the target batch mass. This page accepts target batch masses from 0.01 through 100000 g and ingredient percentages from 0 through 100%; these are this page's input limits, not formula limits. Enter 0% for unused rows. The calculator reports ingredient masses and does not evaluate glaze chemistry or food safety.
Ingredient 1 mass
batch × percent_1 ÷ 100- batch = Target batch mass (g)
- percent_1 = Ingredient 1 percentage (%)
- percent_2 = Ingredient 2 percentage (%)
- percent_3 = Ingredient 3 percentage (%)
- percent_4 = Ingredient 4 percentage (%)
- batch_mass = Target batch mass (g)
- ingredient_1_percent = Ingredient 1 percentage (%)
- ingredient_2_percent = Ingredient 2 percentage (%)
- ingredient_3_percent = Ingredient 3 percentage (%)
- ingredient_4_percent = Ingredient 4 percentage (%)
- ingredient_1_mass = Ingredient 1 mass (g)
- ingredient_2_mass = Ingredient 2 mass (g)
- ingredient_3_mass = Ingredient 3 mass (g)
- ingredient_4_mass = Ingredient 4 mass (g)
Follow the calculation with your values
- Ingredient 1 mass: 300.00 g
Show arithmetic
1000 * 30 / 100Full branch logic
1000 * 30 / 100 - Ingredient 2 mass: 400.00 g
Show arithmetic
1000 * 40 / 100Full branch logic
1000 * 40 / 100 - Ingredient 3 mass: 200.00 g
Show arithmetic
1000 * 20 / 100Full branch logic
1000 * 20 / 100 - Ingredient 4 mass: 100.00 g
Show arithmetic
1000 * 10 / 100Full branch logic
1000 * 10 / 100
Full formulas, symbols and sources
ingredient_1_mass = batch_mass * ingredient_1_percent / 100
Ingredient 2 mass
ingredient_2_mass = batch_mass * ingredient_2_percent / 100
Ingredient 3 mass
ingredient_3_mass = batch_mass * ingredient_3_percent / 100
Ingredient 4 mass
ingredient_4_mass = batch_mass * ingredient_4_percent / 100
- batch_mass
- Target batch mass (g)
- ingredient_1_percent
- Ingredient 1 percentage (%)
- ingredient_2_percent
- Ingredient 2 percentage (%)
- ingredient_3_percent
- Ingredient 3 percentage (%)
- ingredient_4_percent
- Ingredient 4 percentage (%)
- ingredient_1_mass
- Ingredient 1 mass (g)
- ingredient_2_mass
- Ingredient 2 mass (g)
- ingredient_3_mass
- Ingredient 3 mass (g)
- ingredient_4_mass
- Ingredient 4 mass (g)
Frequently asked questions
Must the entered percentages add up to a full batch?
Does the calculator round values upward?
Are the published glaze values universal?
Can I read the output as volume?
Does a result establish food safety?
If I change the target batch mass but keep the percentages, what changes?
Limitations & common mistakes
- Results are computed from your numbers, only as exact as entered, and cannot replace measurement or professional judgment where required.
- The calculator returns ingredient masses and does not assess glaze chemistry, performance, hazards, or food safety.
Formula, sources, and review
This calculation follows the formula published on this page and rests on 2 cited sources, listed under Sources below. Last checked .
Sources & methodology
Sources
- 1 8.1: Introduction to Glaze Chemistry — last verified
- 2 6.1 Understanding Percent — Contemporary Mathematics — last verified