Compost C:N Ratio Calculator

Offline — showing the version cached on .

Show all explainers, focus on one, or collapse them. You can also open or close each section directly.

Results

Estimated mass-weighted compost C:N ratio is 34.68. Target range: Within this page's target range, including both endpoints.

Estimated mass-weighted compost C:N ratio
Target range
Within this page's target range, including both endpoints what this means
Find
Did this solve your problem?

How to use this calculator

  1. Choose Ingredient 1 material profile
    Choose a listed material profile to prefill Ingredient 1’s carbon and nitrogen percentages; edit either value if needed. 3
  2. Enter Ingredient 1 weight (lb)
    Enter Ingredient 1’s material mass in lb. 3
  3. Enter Ingredient 1 carbon percentage
    Enter Ingredient 1’s carbon percentage for its weighted total. 3
  4. Enter Ingredient 1 nitrogen percentage
    Enter Ingredient 1’s nitrogen percentage for its weighted total. 3
  5. Choose Ingredient 2 material profile
    Select Ingredient 2’s matching profile to seed its composition fields; both remain editable. 3
  6. Enter Ingredient 2 weight (lb; use zero to omit)
    Enter Ingredient 2’s mass in lb; zero leaves this slot out of the mix. 3
  7. Enter Ingredient 2 carbon percentage
    Enter the carbon percentage for Ingredient 2’s material. 3
  8. Enter Ingredient 2 nitrogen percentage
    Enter the nitrogen percentage for Ingredient 2’s material. 3
  9. Choose Ingredient 3 material profile
    Use a listed profile as Ingredient 3’s starting point, then revise its percentages if appropriate. 3
  10. Enter Ingredient 3 weight (lb; use zero to omit)
    Enter Ingredient 3’s weight in lb. 2
  11. Enter Ingredient 3 carbon percentage
    Enter Ingredient 3’s carbon percentage for the calculation. 3
  12. Enter Ingredient 3 nitrogen percentage
    Enter Ingredient 3’s nitrogen percentage for the calculation. 3
  13. Read Estimated mass-weighted compost C:N ratio

Estimated mass-weighted compost C:N ratio () vs Ingredient 1 weight (lb) (lb)

39.9712.520.0110000

Estimated mass-weighted compost C:N ratio () Ingredient 1 weight (lb) (lb)

What this calculates

Compost materials contribute carbon and nitrogen in different proportions. A carbon-to-nitrogen (C:N) ratio compares those elements in a mixture. This page estimates the ratio from the ingredient entries you provide. 3

Cornell describes about 30 parts carbon to one part nitrogen by weight as an ideal proportion. That is general context for a compost balance. The page’s own target check is described with the result. 1

Read the Estimate at a Glance

The calculator estimates a compost C:N ratio weighted by material mass. It also gives a separate status for the target range. That status shows whether the estimate falls within the checked range. UCANR sets the range from 25 through 35. 3

How the C:N Calculation Works

Short form: total weighted carbon ÷ total weighted nitrogen = estimated C:N. The page uses each material’s weight and its carbon and nitrogen percentages. It combines these values into totals. Dividing the carbon total by the nitrogen total gives the estimated mass-weighted ratio. 3

Carbon total: multiply each weight by its carbon percentage. Add the results. Divide the sum by 100. Nitrogen total: multiply each weight by its nitrogen percentage. Add the results. Divide the sum by 100. Ratio: divide the carbon total by the nitrogen total. 3

Weight means the amount of material assigned to an ingredient. Carbon and nitrogen percentages show what the material contains. The formula divides each percentage by 100 before it calculates that ingredient’s share. 3

Enter Your Ingredients

Enter Your Ingredients Use the chart to find approximate carbon and nitrogen percentages for your ingredients. Multiply each ingredient’s percentage by its parts by weight and add the totals; then divide carbon by nitrogen to get the C:N ratio. 3

Materials in the Source Chart

UCANR’s chart lists Coffee grounds, Alfalfa pellets, Blood meal, Vegetable wastes, fresh, leafy, and Newspaper or cardboard, dry. The chart gives carbon and nitrogen percentages for its materials. It does not give a separate C:N ratio for each chart material. 3

Practical Ways to Adjust a Mix

UCANR recommends changing ingredient proportions when a mix falls above or below the target range. Edit an ingredient’s weight and recalculate to test a possible change. Compare the new ratio with the earlier estimate. This shows the change’s effect. 3

Worked examples

UC ANR worked example: hay, kitchen scraps, and coffee grounds: Estimated mass-weighted compost C:N ratio 34.68

See inputs and calculation

Starting values

Ingredient 1 material profile
Non-legume hay, dry (UC ANR example)
Ingredient 1 weight (lb)
50 lb
Ingredient 1 carbon percentage
40 %
Ingredient 1 nitrogen percentage
1 %
Ingredient 2 material profile
Kitchen scraps (UC ANR example)
Ingredient 2 weight (lb; use zero to omit)
10 lb
Ingredient 2 carbon percentage
10 %
Ingredient 2 nitrogen percentage
1 %
Ingredient 3 material profile
Coffee grounds (UC ANR chart)
Ingredient 3 weight (lb; use zero to omit)
2 lb
Ingredient 3 carbon percentage
25 %
Ingredient 3 nitrogen percentage
1 %
    1. Estimated mass-weighted compost C:N ratio: 34.68
      Show arithmetic
      (50 * 40 / 100 + 10 * 10 / 100 + 2 * 25 / 100) / (50 * 1 / 100 + 10 * 1 / 100 + 2 * 1 / 100)
    2. Target range: Within this page's target range, including both endpoints
      Show arithmetic
      1
      Full branch logic((50 * 40 / 100 + 10 * 10 / 100 + 2 * 25 / 100) / (50 * 1 / 100 + 10 * 1 / 100 + 2 * 1 / 100) >= 25 ? ((50 * 40 / 100 + 10 * 10 / 100 + 2 * 25 / 100) / (50 * 1 / 100 + 10 * 1 / 100 + 2 * 1 / 100) <= 35 ? 1 : 0) : 0) == 1 ? 1 : 0
    Original example and source context

    First, the answer: 34.7 (estimated mass-weighted compost c:n ratio). UCANR’s worked-example row is: 50 lb, 40 %, 1 %, 10 lb, 10 %, 1 %, 2 lb, 25 %, 1 % → 34.7 (estimated mass-weighted compost c:n ratio). The source published this example. This page did not produce this result. 3

    Read each ingredient’s inputs in this order: weight, carbon percentage, nitrogen percentage. Carbon total: multiply each weight by its carbon percentage. Divide each result by 100. Add the results. Nitrogen total: multiply each weight by its nitrogen percentage. Divide each result by 100. Add the results. Ratio: divide the carbon total by the nitrogen total. 3

    Related Calculator Features

    Cornell’s excerpt describes a calculator that uses material mass and carbon, nitrogen, and moisture percentages. The supplied sources give no details about AI chat or environmental-calculator directories. They also say nothing about Top & Updated listings or ZIP downloads with Pro. 2

    Key facts

    • The UCANR worked mix uses non-legume hay, kitchen scraps, and coffee grounds. 3 3
    • The UCANR chart includes wheat or oat straw, dry. 3 3
    • Cornell describes material mass as “as is,” or “wet weight.” 2 2

    How this is calculated

    Estimate a mass-weighted C:N ratio for one to three compost materials by dividing total carbon by total nitrogen, following the UC ANR method. Use pounds (lb) for each material weight; the page offers pounds only. The calculation uses entered weights and carbon/nitrogen percentages as entered. It does not identify or convert a wet or dry weight basis, accept a moisture percentage, or adjust for moisture or carbon/nitrogen bioavailability. Cornell's calculator asks for wet weight and a moisture percentage; Cornell's fact sheet says the ideal ratio may need adjustment for bioavailability. Treat this result as an estimate. Choose a UC ANR material profile to prefill approximate carbon and nitrogen percentages, or edit those percentages to use your own figures. Page input limits are: ingredient 1 weight 0.01–10,000 lb; ingredient 2 and 3 weights 0–10,000 lb; each carbon percentage 0–100 pct; and each nitrogen percentage 0.01–100 pct. These are this page's input limits. UC ANR says, "If it's between 25 and 35, your pile should compost beautifully." This page interprets "between 25 and 35" inclusively, counting exactly 25 and 35 within its target range. The source also describes adjusting ingredient proportions to bring a ratio into range; this page reports the ratio and its in/out status but does not calculate adjusted proportions. The captured UC ANR document is undated. The Cornell fact sheet says it was created August 24, 1995 and last updated October 2000; the Cornell calculator capture carries a 1996 copyright notice.

    Estimated mass-weighted compost C:N ratio

    (total_carbon) ÷ (total_nitrogen)
    • total_carbon = Total carbon value
    • total_nitrogen = Total nitrogen value
    Understand each part

    These names are shorthand for the exact calculations below, not different formulas.

    1. Total carbon value (total_carbon)

      Add the carbon contributed by each material, using its weight and carbon percentage.

      See the definition of total_carbonweight_1 * carbon_1 / 100 + weight_2 * carbon_2 / 100 + weight_3 * carbon_3 / 100
    2. Total nitrogen value (total_nitrogen)

      Add the nitrogen contributed by each material, using its weight and nitrogen percentage.

      See the definition of total_nitrogenweight_1 * nitrogen_1 / 100 + weight_2 * nitrogen_2 / 100 + weight_3 * nitrogen_3 / 100
    Follow the calculation with your values
    1. Estimated mass-weighted compost C:N ratio: 34.68
      Show arithmetic
      (50 * 40 / 100 + 10 * 10 / 100 + 2 * 25 / 100) / (50 * 1 / 100 + 10 * 1 / 100 + 2 * 1 / 100)
    2. Target range: Within this page's target range, including both endpoints
      Show arithmetic
      1
      Full branch logic((50 * 40 / 100 + 10 * 10 / 100 + 2 * 25 / 100) / (50 * 1 / 100 + 10 * 1 / 100 + 2 * 1 / 100) >= 25 ? ((50 * 40 / 100 + 10 * 10 / 100 + 2 * 25 / 100) / (50 * 1 / 100 + 10 * 1 / 100 + 2 * 1 / 100) <= 35 ? 1 : 0) : 0) == 1 ? 1 : 0
    Full formulas, symbols and sources

    cn_ratio = (weight_1 * carbon_1 / 100 + weight_2 * carbon_2 / 100 + weight_3 * carbon_3 / 100) / (weight_1 * nitrogen_1 / 100 + weight_2 * nitrogen_2 / 100 + weight_3 * nitrogen_3 / 100)

    Target range

    target_status = (cn_ratio >= 25 ? (cn_ratio <= 35 ? 1 : 0) : 0) == 1 ? 1 : 0

    weight_1
    Ingredient 1 weight (lb) (lb)
    carbon_1
    Ingredient 1 carbon percentage (%)
    nitrogen_1
    Ingredient 1 nitrogen percentage (%)
    weight_2
    Ingredient 2 weight (lb; use zero to omit) (lb)
    carbon_2
    Ingredient 2 carbon percentage (%)
    nitrogen_2
    Ingredient 2 nitrogen percentage (%)
    weight_3
    Ingredient 3 weight (lb; use zero to omit) (lb)
    carbon_3
    Ingredient 3 carbon percentage (%)
    nitrogen_3
    Ingredient 3 nitrogen percentage (%)
    cn_ratio
    Estimated mass-weighted compost C:N ratio
    target_status
    Target range: 0 = Outside this page's target range, 1 = Within this page's target range, including both endpoints

      Frequently asked questions

      Are the source profile percentages exact?
      UCANR calls its chart’s carbon and nitrogen percentages approximate. Your material may differ, so treat a preset as a starting point. 3
      Must you weigh every ingredient?
      UCANR says it may be unlikely that people weigh every ingredient. It presents this calculation as a way to consider changes in proportions anyway. 3
      Does an in-range result guarantee finished compost quality?
      UCANR says a mix inside its target band should compost beautifully. That wording describes an expected result, not a guarantee for every pile. 3
      What if a material is missing from the profile list?
      The selector lists named profiles. Separate carbon and nitrogen fields accept values you enter directly. For an unlisted material, enter those percentages if you have them. 3
      Can the calculator tell you how much to add?
      This page reports a ratio and target status, not a suggested weight to add. UCANR discusses changing proportions but gives no page-specific add amount. 3
      Why might an ideal balance need adjustment?
      Cornell says a proportion may need adjustment based on how available carbon and nitrogen are. The excerpt gives no numerical adjustment for this factor. 1

      Limitations & common mistakes

      • Weight bounds are page-set, not formula-set: 0.01–10000 lb for Ingredient 1; 0–10000 lb for Ingredients 2 and 3.
      • For each ingredient, page choices set carbon at 0 to 100 % and nitrogen at 0.01 to 100 %, not formula limits.
      • Outside any accepted limit, the calculator refuses to answer and states the exceeded limit.
      • Results use entered values and are only as exact as those values; they cannot replace measurement or required professional judgment.
      • This formula has no moisture input, while Cornell’s separate calculator asks for moisture percentage. 2

      Formula, sources, and review

      This calculation follows the formula published on this page and rests on 3 cited sources, listed under Sources below. Last checked .

      How we review

      Sources & methodology

      ConstantValueUnitSource
      compost_cn_ratio_c1253
      compost_cn_ratio_c2353

      Sources